Carbon Fiber Tapered Sections Description/ Length/ section dimensions/ notes
Section dimensions vary usually +/- .020" sometimes a bit more.
1) Red Mast Top   96" L 1.92 ID 2.05 OD x 1.21 OD 0 deg Z (stiff) 30% Carbon Finland          $60
RDM is reduced diameter mast, designed for surf conditions, Tapers rapidly to small diameter
 Items 2-12 , $40 each
2) RDM Mast Base 6l.2" L 1.92 ID 2.10 OD w/ 1.25 ferrule + 6"                 70% carbon
3) RDM Mast Base 75.7" L 1.91 ID 2.08 OD no ferrule 1.25 ID 1.45 OD   100% carbon
4) Std Mast Base     75.7" L 1.91 ID 2.00+ OD no ferrule 1.50 ID 1.64 OD 50% carbon
The following are tip sections, 100% carbon:
5) 84.5" L l .59 ID 1.72 OD x 1.03 ID 1.25 OD
6) 82.2" L 1.56 ID 1.70 OD x 1.03 ID 1.25+ OD
7) 80.5" L 1.48 ID 1.66 OD x 1.00-ID 1.18 OD
8) 80-" L 1.54 ID ~1.65 OD x 1.03 ID 1.23 OD
9) 77.5 " L 1.50- ID 1.66 OD x 0.98 ID 1.16 OD
10) 75.8" L 1.50- ID 1.66 OD x 1.00-ID 1.15 OD
11) 69-" L 1.33 ID 1.45 OD x 0.87 ID 1.06 OD
12) 65-" L 1.31 ID 1.45 OD x 0.80 ID 1.07 OD

Others:
SC1) 109.7" L 1.91 ID 2.1 OD x 1.7 ID 1..875 OD 100% Carbon, Heavy Duty
SC2)  99.3" L + 7" ferrule 1.91 ID 2.07 OD x 1.7 ID 1.86 OD 100% Carbon
SC3) 105.8" L 1.91 ID 2.14 OD x 1.7 ID 1.93 OD  100% Carbon, Very Heavy Duty
SC4)  89" L + 6.5" ferrule 1.91 ID 2.04 OD Special reinforced 1.7" ferrule
Slight Taper 48.6" L 1.91 ID 2.076 OD x 1.772 ID 1.955 OD
Batten: 104.8" L 0.66 ID 0.875 OD x 0.38 ID 0.63 OD
Non tapered tubes
T1) 155.8" L 1.25 ID 1.50 OD
T2) 102-" L 1.40 ID 1.50 OD
T3)  49-50" L 1.26 ID 1.36 OD
T4) 49.6" L  0.71 ID 0.90 OD
T5) 45.4" L 1.23" ID 1.30 OD

Contact Steve Blevins blevins@sisna.com | 801-571-7601